home *** CD-ROM | disk | FTP | other *** search
- Path: erinews.ericsson.se!usenet
- From: ecsjols@klecsd.ericsson.se (Joakim Olsen)
- Newsgroups: comp.sys.amiga.graphics
- Subject: Re: Cybervision
- Date: Wed, 07 Feb 1996 07:09:55 GMT
- Organization: Ericsson Mobile Communications AB
- Message-ID: <4f9j7b$jnc@erinews.ericsson.se>
- References: <695.6610T930T2219@telepost.no>
- NNTP-Posting-Host: ecsjols.ericsson.se
- X-Newsreader: Forte Agent .99b.112
-
- On 6 Feb 1996 16:19:42 GMT, jornilse@telepost.no (J°rn Ove Nilsen) wrote:
-
- >I has some big problems with my Cybervision. It seems like I'm just getting 1
- >new mode in screenmode preferences, but when I start CVMode, I have a big
- >list of 17 resolutions. I can't open a test screen from CVMode either. An
- >error message like this comes up instead; Can't open testscreen!
- >
- >The card is fabric new, and should not have any defects, I got V2.15 of the
- >software, V1.38 of cybervision monitor driver, buster rev.11 and enough RAM.
- >
- >Does someone have any idea of what is wrong? I would be very pleased if
- >someone could help me out of this problem.....
-
- How much memory do you have in your machine? CyberGraphX-screens use
- fast-memory for buffering them, and if you don't have enough memory you
- won't succeed in opening them. I have 14Mb in my a3000 and that feels like
- quite a bit too little...
-
-
-
-
- [ Joakim Olsen
- [ e-mail, work: ecsjols@klecsd.ericsson
- [ e-mail, home: jocke@plea.se
- [ IRC, #Amiga: Cleese
- [ A3000/14Mb/1Gb/CV64(4Mb)
-
-